Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

Telescopic Pocket Lightning Counter Tester - Yangzhou Darui

Published: 2020-08-12 14:01:30

Views: 2922

Category: Lightning Counter Calibrator

Product Description

Telescopic Pocket Lightning Counter Tester


Darui Electric recommends:

Telescopic Pocket Lightning Counter Tester Product Keywords: Lightning counter calibrator, lightning counter tester, rod lightning counter calibrator, arrester discharge counter tester, pocket lightning counter tester, lightning counter calibrator, lightning counter action tester. The telescopic pocket lightning counter tester is carefully designed and developed by our technical personnel based on the needs of power users. The product has an attractive appearance and is easy to carry and use. It replaces traditional bulky testing equipment and methods, and is well received by professionals.

 



Usage Instructions:



1. Charge before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes 3-4 hours to fully charge an empty battery. A red light on the charger indicates charging; a green light indicates full charge. Before use, connect the attached ground wire plug to the tail end, and clamp the ground clip to the earth.



2. According to the installation height of the counter, appropriately extend the telescopic discharge rod.



3. Press the red button to activate high voltage for about 1 second. When the indicator light illuminates (with a slight flicker), gently tap the connection end between the counter and the arrester for testing.



4. After each tap, the discharge rod tip should be moved away from the counter. If repeated testing is needed, you do not have to release the button. After about 1-2 seconds, when the indicator light flickers again, you can tap again for testing.



5. Continuous testing may cause the tester to heat up; please allow appropriate intervals.



6. If the indicator light does not flicker after pressing the button for more than 3 seconds, the battery needs charging.



7. Do not disassemble the tester arbitrarily. If the battery capacity noticeably decreases or charging efficiency is too low, replacement is needed. Please purchase the dedicated battery pack from our company.



Note: When the indicator light is on (with a slight flicker), do not touch the electrode parts with any part of the body, as there is a risk of electric shock.



Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.




 
WeChat QR Code
💬
💬 Message ✕

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us