Second-level Installation, Testing, and Repair Lightning Counter Tester for Sale and Rental Usage Instructions:
1. Please charge before use. To ensure charging efficiency and extend battery life, use the dedicated charger. It takes about 3-4 hours to fully charge an empty battery. A red light on the charger indicates charging.
2. According to the installation height of the counter, properly extend the telescopic discharge rod.
3. For the dedicated grounding wire, insert one end's plug into the jack at the rear of the calibrator, and connect the other end's clip to the ground.
4. Press the red button to turn on high voltage for about 1 second. When the indicator light lights up (flickers), gently tap the connection end between the counter and the arrester for testing.
5. After each tap, the tip of the discharge rod should leave the counter. If repeated testing is needed, do not release the button. Wait for 1-2 seconds until the indicator light flickers again, then tap again for testing.
6. Continuous testing may cause the calibrator to heat up. Please allow appropriate intervals to reduce malfunctions and extend battery life.
7. The calibrator output has three levels: high, medium, and low, which can be adjusted via the toggle switch on the head to suit testing different types or brands of counters.
8. If the indicator light does not flicker after pressing the button for more than 3 seconds, the battery needs charging.
9. Do not disassemble the calibrator arbitrarily. If the battery capacity significantly drops or charging efficiency is too low, replace it. Please purchase the dedicated battery pack from our factory.
Second-level Installation, Testing, and Repair Lightning Counter Tester for Sale and Rental Technical Features:
The lightning counter calibrator is designed and developed based on the needs of power users. The product has a beautiful appearance and is convenient to carry and use.
1. Portable design with small size and light weight;
2. Telescopic electrode can be adjusted in length according to height;
3. AC/DC dual power supply with built-in rechargeable battery, one charge can last for half a year;
4. Strong anti-interference capability;
5. Maximum voltage 1500V
Technical Specifications:
Geometric dimensions: φ36×375, head is φ50×100,
Weight: 780 grams.
Power: DC6V, four D-size batteries can provide more than 2000 discharge tests. If power
is insufficient, charging time will be extended. Unscrew the back cover to replace batteries.
Output voltage: 800～1000V.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
