Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

FZY-3 Mining Stray Current Tester - Yangzhou Darui

Published: 2020-08-11 16:04:35

Views: 2922

Category: Mining Stray Current Tester

Product Description
FZY-3 Mining Stray Current Tester 

Darui Electric recommends:

FZY-3 Mining Stray Current Tester is a portable rectifier instrument with high sensitivity and multi-range protection circuit.Its characteristics are: wide measurement range, with a total of twenty ranges, capable of measuring AC/DC stray voltage and stray current separately, no power supply needed, safe and reliable. It is suitable for testing the current and voltage generated by steel rails, water pipes, cables, etc. in underground coal mines, preventing premature explosions and other combustion accidents caused by stray current discharge, minimizing fire sources in mines.



FZY-3 Mining Stray Current Tester Product Usage Instructions:

4. When AC stray current cannot be measured at a location, DC stray current should also be tested, and vice versa.

5. When measuring stray voltage, the gear settings are: 50mA corresponds to 0.2V, 250mA corresponds to 1V, 1A corresponds to 4V, 5A corresponds to 20V, 10A corresponds to 40V. (i.e., current value multiplied by 4 gives the voltage value)

6. When the stray current magnitude is unknown, first set to the maximum range, then gradually decrease until the appropriate measurement gear is reached.

7. When the measured current exceeds 5A, the instrument should only be used for short-term measurement; when the measured current exceeds 10A, the instrument should only be used for instantaneous measurement to avoid burning out components and the meter due to high current.

8. When measuring DC stray current, if the pointer deflects in the reverse direction, swap the test leads.

9. When the instrument is not in use, it should be set to the "Off" position.



 



After-sales Service System:



1. Our company has a professional after-sales service team, with the after-sales service department headed by the vice president in charge of sales.

2. The after-sales service department currently has 10 staff members, ensuring timely maintenance of our products.

3. Our after-sales service goal is: timely resolution of on-site equipment failures, rapid response, and excellent service!

When purchasing a Mining Stray Current Tester, please choose the Shengxu brand, ensuring product quality and after-sales service.



Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
WeChat QR Code
💬
💬 Message ✕

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us